Electric Hob Repair Request

Electric Hob Installation in Birmingham and within 35 miles

Need your new electric cooker professionally installed?
Limitless Improvements provides safe, reliable electric cooker installation across [your service areas]. We’ll disconnect your old unit (where safe to do so) and connect your new cooker to your existing electrical point, test it and show you it working.

Section: What’s included in our installation service

Bullet list, for example:

• Safe disconnection of your old electric cooker (where the existing connection is suitable)

• Positioning your new cooker in place

• Connecting to your existing cooker outlet / terminal

• Basic functional test to confirm it powers on and heats

• Removal of packaging (optional)

• Friendly advice on basic controls

Section: Important – what must already be in place

To keep things safe and compliant, we can only connect to a suitable existing electrical supply. Before booking, please check:

• ✅ There is a dedicated cooker circuit already installed (not a plug-top or spur from a normal socket).

• ✅ The circuit is correctly rated for your new cooker (many cookers require around a 32 A circuit – your electrician or the manufacturer’s instructions can confirm the exact requirement). RANGEMASTER+1

• ✅ A cooker control / isolator switch is present and easily accessible, not directly above the hob. Pro Certs Software Ltd

• ✅ There is a cooker outlet plate / suitable terminal located behind or next to where the cooker will sit.

• ✅ The space is clear, worktops are cut to size, and the floor is level enough for us to slide the appliance into position.

You can add a bold warning:

🔒 We do not carry out electrical installation work
We don’t:

• Install new circuits or upgrade your consumer unit

• Move sockets or cooker switches

• Correct undersized cables or incorrect fusing

If your wiring isn’t suitable, we’ll have to abort the installation and may charge a failed visit fee. Please speak to a qualified electrician before booking if you’re unsure.

 

How your installation visit works

Short step-by-step:

1. Arrival & safety checks – We confirm the supply has been isolated and visually check the existing wiring/connection point.

2. Disconnection – We disconnect your old cooker (where safe and suitable).

3. Connection & positioning – We connect your new cooker to the existing point and level it in place.

4. Testing – We perform a basic function check (power on and heating) following the manufacturer’s instructions.

5. Handover – We show you the isolator, how to safely turn the appliance off, and answer basic questions.

Section: Safety & legal

All electrical work must comply with UK wiring regulations and Building Regulations (including Part P). Any changes to your wiring, consumer unit or new circuits must be carried out by a suitably qualified electrician. We only connect to existing, suitable supply points and will not proceed if we believe the installation is unsafe.

 

Appliances Installations: Click below
Gas cooker installation
Electric cooker installation
Dual fuel cooker installation
Gas hob installation
Electric hob installation

Electric oven installation
Gas oven installation